通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
江蘇春晨電纜有限公司
江蘇春晨電纜有限公司
江蘇春晨電纜有限公司專業生產JFEYH10KV高壓電機引接線，This specification specifies requirements, test methods, inspection rules, packaging, marking, transportation and storage of “conductive carbon black“ materials.
江蘇春晨電纜有限公司：http://m.aiynx.com/st159127/
1 range
本規范規定了采購“導電炭黑”材料的要求、試驗方法、檢驗規則、包裝、標志、運輸及貯存。
This specification specifies requirements, test methods, inspection rules, packaging, marking, transportation and storage of "conductive carbon black" materials.
2 要求和試驗方法，JFEYH10KV高壓電機引接線
2 requirements and test methods
導電炭黑的要求和試驗方法符合表1規定。
The requirements and test methods of conductive carbon black conform to the requirements of Table 1.
表1 導電炭黑的要求和試驗方法，，JFEYH10KV高壓電機引接線
Table 1 requirements and test methods for conductive carbon black
序號 試驗項目 單位 性能指標 試驗方法，
Test method for unit performance index of serial number test item
1 比表面積 m2/g 114 GB/T 3780.5
1 specific surface area m2/g 114 GB/T 3780.5
2 吸油值 ml/g 1.3 GB/T 3780.2
2 oil absorption value ml/g 1.3 GB/T 3780.2
3 pH值 — ≥7 GB/T 3780.7
3 pH value is greater than or equal to 7 GB/T - 3780.7
4 加熱減量 % 1.5～2 GB/T 3780.8
4 heating reduction% 1.5 ~ 2 GB/T 3780.8
5 灰分 % ≤0.5 GB/T 3780.10
5 ash% less than or equal to 0.5 GB/T 3780.10
6 雜質 % 無 GB/T 3780.12
6 impurity% no GB/T 3780.12
3 檢驗規則
3 inspection rules
3.1 檢驗方法及要求
3.1 inspection methods and requirements
3.1.1 對于定點廠家供應的導電炭黑，產品性能穩定，作隔批抽檢。
3.1.1 for the supply of conductive carbon black manufacturers, the product performance is stable, for sampling.
3.1.2 對于新廠家供應的導電炭黑，應每批抽檢，連續5次抽樣均合格，轉隔批抽檢。
3.1.2 for the supply of new manufacturers of conductive carbon black, should be every batch of sampling, continuous sampling of 5 are qualified, to separate batches of sampling.
3.1.3 抽樣方法
3.1.3 sampling method
每批任取一包。
Each batch to take a package.
3.2 檢測項目
3.2 test items
3.2.1 可檢項目為加熱減量、PH值、灰分、雜質。
3.2.1 can be seized items for heating reduction, pH value, ash, impurities.
3.2.2 對于無法檢測的性能依據生產廠家的檢測報告或質保書驗收，并進行定期委外檢測。
3.2.2 for the performance of the test can not be based on the manufacturer's test report or the quality of the acceptance of the book acceptance, and regular outsourcing testing.
4 包裝
4 packaging
用內袋是三層牛皮紙，外袋是二層牛皮包裝，應完整無破損，防潮防污染。
With the inner bag is three layers of kraft paper, the outer bag is two layers of kraft packaging, should be complete without damage, moisture and anti pollution.
5 標志
5 mark
包裝外應印有：產品名稱、批號、生產日期、凈重、生產廠名
Packaging should be printed with: product name, batch number, production date, net weight, the name of the factory
6 附件
6 attachment
產品進廠時，隨貨應有材料生產廠家質量保證書或質量檢驗單，*供貨時，必須附有法定部門的型式試驗報告。正常供貨時，每年應提供一次法定部門的型式試驗報告。
When the product enters the factory, along with the goods should have the material manufacturer quality assurance book or the quality inspection sheet, the first time, must have the legal department the type test report. When the normal supply, the annual report of the type test of the legal department should be provided.
7 運輸
7 transportation
運輸時避免碰撞破損、防混放。
Avoid collision damage and prevent mix.
8 貯存
8 storage
應該存于通風良好，陰涼干燥、防潮的庫房內，并注意防破包造成污染。
Should be stored in a well ventilated, cool and dry, damp proof warehouse, and pay attention to prevent damage caused by pollution.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
