The refrigerant type dryer B-KOOL by BAUER cools the compressed air and extends the filter cardridge life time.
冷凍式干燥機B-KOOL冷卻壓縮空氣的溫度，并且延長過濾器濾芯的壽命。
The B-KOOL unit is integrated into the high pressure piping of the compressor after the final oil and water separator.
B-KOOL冷干機集成于壓縮機的排氣管路上。
It cools the hot, saturated and compressed air to a temperature of approx. +3°C~+9°C.
它把熱的飽和的壓縮空氣的溫度降低到3~9度左右。
Technical data:
技術參數表：
Model | B-KOOL 680i |
Medium | Air |
Ambient temperature range | +5 °C to +45°C |
Refrigerant | 134 A |
Max inlet temperature | 60°C |
Max working pressure | 350 bar |
Min working pressure | 100 bar |
Flow rate | 200 – 700 l/min (charging rate, 10 litre bottle, 0-200 bar) 200 – 650 l/min (FAD, according to ISO 1217) |
Power supply | 100 - 127VAC 50/60Hz or
200 - 240VAC 50/60Hz depending on variant |
Power consumption | max 550W at 50 Hz |
COMPRESSOR CONTROL B-CONTROL MICRO
壓縮機控制系統 B-CONTROL MICRO
The B-CONTROL MICRO has following performance for compressor operation:
在壓縮機運行過程中，B-CONTROL MICRO可提供以下性能：
Full automatic start/stop operation according to specific parameters
按設定的特定參數自動啟停機
Supervising of operating parameters
監控操作參數
Shut down in case of deviation from specified operating parameters
當運行數據發生偏離時，機器可按照設定的參數停機保護
Display of operating data using symbols, maintenance information and error indication in English language.
可顯示操作數據、維護信息以及錯誤提示
Technical Data: 技術參數 | |
Ambient temperature range : 環境溫度范圍： | -10°C to + 60°C
(5-90% humidity; non-condensing 濕度5-90%，無冷凝)) |
Standard operating voltage : 標準的工作電壓： | 400 V, 50 Hz, 3ph |
Control voltage (internal) : 控制電壓（內部的）： | 24 VDC |
Protection class control cabinet: 控制箱防護等級： | IP 55 |
Protection class display: 顯示器防護等級： | IP 65 |
Scope of supply:
供貨范圍：
§ Star-delta contactor combination (4kW and higher)
星三角開關相結合（4千瓦或更高）
§ Regulated power supply
穩壓電源
§ Switchbox with all necessary auxiliary relays and terminal boards
帶輔助繼電器及接線端子盒的轉換開關盒
§ Combined main switch / emergency off switch
主開關/緊急開關
§ Main circuit breaker
主斷路器
§ Control panel with key pad, illuminated LCD-Display
控制開關帶鍵盤及液晶顯示器
Features:
特點：
§ Indication of actual pressure, working hours and operation mode
§ 可顯示實際壓力，工作小時數及操作模式
Semi and fully automatic operation selectable
半自動或全自動操控
Common SI-units can be chosen for pressure and temperature
可選擇壓力和溫度的通用SI單位
Simple indication by using symbols
使用符號明了顯示
§ Service/maintenance interval indication
§ 顯示服務或保養周期
§ Logbook with up to 100 entries
§ 多達100條的數據日志
§ Easy software update and upload by SD card
§ 軟件更新方便，可通過SD卡上傳
§ Cycle counter & hour meter
§ 周期計數器和小時計時器
Safety: information for the operator when to exchange the final separator
安全特點：當應該更換中斷油水分離器時信息通知操作者
Supervision or control of:
監管或控制：
§ Oil pressure monitoring
潤滑油油壓監控
Protection from wrong rotation
防止機器轉向錯誤
§ Temperature monitoring
溫度監控
Security of too high temperatures (last stage) / low temperature (ambient)
保證溫度過高（級）或者溫度太低（環境溫度）時的安全性
§ Motor over-current (indirect by PTC)
馬達過載保護（通過PTC完成）
Operating mode操作模式：
§ Fully automatic operation / semi automatic operation
§ 全自動或半自動操作
