Chroma new product 62000P series programmable DC current supply, providing a number of unique features for ATE integration and testing. These features include constant power operating range, precision of output current and voltage measurement, output a trigger signal, and can simulate complex DC transient waveforms to test equipment of transient fault, pressure rise and the ability of other voltage deviation. 62000P is a new standard of high accuracy programmable DC power supply, specially designed to be used in the D2D converter and other similar products. 62000P series contains 12 different models, from 600W to 5000W and 120A to 600V. Because a single instrument can provide a fixed power operating range of high voltage / low current and low voltage / high current, it can reduce the number of DC power supplies required for general ATE applications. 62000P also have 16 bit high resolution accurate voltage and current read value read back function, which represents the system no longer need complex additional shunt / voltmeter, amount to measure accuray measured input parameters value read. 62000P power supply is also provided with a I/O port to provide 8 DC-ON, bitTTLs, protection of the output signal, remote inhibit function and system timing measurement of the output trigger signal. Another unique feature of the 62000P series power supply is the establishment of complex DC transient waveforms. This function can be used to test the input voltage and leakage current and other voltage changes. It is an ideal choice for the test of aircraft equipment and other equipment that can generate voltage interruption. The scope of its application include the DC/DC converter and the counter with converter, pressure drop test, engine start simulation, battery automatic charging, electronic product life cycle test and so on. Under constant power range to provide a wide range of operation 62000P series DC power supply to provide a broad range of operation. For example, the output of the 62012P-80-60 specification for 1200W/80V/60A can be flexibly operated in different combinations as shown on the right side of the graph. Such as the general DC power supply to provide all the output voltage of the same rated current, while the 62000P at low output voltage to provide a larger current. This means that low voltage / high current and high voltage / low current of both analytes using a single DC power supply input test stability, within the general ATE system to avoid multiple DC power supply to save cost and space.