江蘇春晨電纜有限公司:http://m.aiynx.com/st159127/
1 range
本規范規定了采購“工業凡士林”材料的分類、要求、試驗方法、包裝、標志、運輸及貯存。
The specification of the purchase of "industrial Vaseline" material classification, requirements, test methods, marking, packaging, transportation and storage.
2 采用標準
2 using standard
SH/T 0039-1990 工業凡士林
SH/T 0039-1990 industrial vaseline,JGG高壓硅橡膠電機引接線
3 分類
3 Classification
產品按牌號分為1號和2號。
Products are divided into 1 and 2 according to grades.
4 要求和試驗方法
4 requirements and test methods
工業凡士林的要求和試驗方法符合表1規定。JGG高壓硅橡膠電機引接線
Industrial Vaseline requirements and test methods is shown in table 1.
表1 工業凡士林的要求和試驗方法
Table 1 Industrial Vaseline requirements and test methods
序號 試驗項目 單位 性能指標 試驗方法, Test method for unit performance index of serial number test item
1號 2號
2 No. 1
1 外觀 — 淡褐色至深褐色均質無塊軟膏 淡褐色至深褐色均質無塊軟膏 目測
1 - the appearance of light brown to dark brown homogeneous block light brown to dark brown ointment homogeneous block visual ointment
2 滴熔點 ℃ 45~80 45~80 GB/T 8026
2 drop melting point 45 ~ 8045 ~ 80 ~ GB/T 8026
3 酸值 mgKOH/g ≤0.1 ≤0.1 GB/T 264
The 3 value is less than or equal to 0.1 GB/T 264 mgKOH/g 0.1
4 腐蝕 合格 合格 SH/T 0331
4 corrosion qualified SH/T 0331
5 水溶性酸或堿 無 無 GB/T 259
5 water soluble acid or alkali no no GB/T 259
6 閃點 ℃ ≥190 ≥190 GB/T 3536
The 6 point is more than 190 DEG C for more than 190 GB/T 3536
7 運動粘度(100℃) mm2/s 10~20 15~30 GB/T 265
7 kinematic viscosity (100 C) mm2/s 10 ~ 2015 ~ 30 GB/T 265
8 錐入度(150g,25℃),0.1mm 140~210 80~140 GB/T 269
8 cone penetration (150g, 25 C), 0.1mm 140 ~ 21080 ~ 140 GB/T 269
9 機械雜質 % ≤0.03 ≤0.03 GB/T 511
9 mechanical impurity is less than or equal to 0.03 is less than or equal to 0.03 GB/T 511
10 水分 % 無 無 GB/T 512
10 water% GB/T 512
5 檢驗規則
5 inspection rules
5.1 檢驗方法及要求
5.1 inspection methods and requirements
5.1.1 對于定點廠家供應的工業凡士林,產品性能穩定,作隔批抽檢。
5.1.1 for fixed-point manufacturers supply industrial Vaseline, stable product performance, for every batch of samples.
5.1.2 對于新廠家供應的工業凡士林,應每批抽檢,連續5次抽樣均合格,轉隔批抽檢。
5.1.2 for the new supply of industrial Vaseline, every batch of samples, 5 consecutive sampling all qualified, to every batch of samples.
5.1.3 抽樣方法
5.1.3 sampling method
每批任取一包。
Each batch to take a package.
5.2 檢測項目
5.2 test items
5.2.1 可檢項目為外觀、滴熔點、水分、機械雜質。
5.2.1 inspection items for appearance, melting point, moisture, mechanical impurities.
5.2.2 對于無法檢測的性能依據生產廠家的檢測報告或質保書驗收,并進行定期委外檢測。
5.2.2 for the performance of the test can not be based on the manufacturer's test report or the quality of the acceptance of the book acceptance, and regular outsourcing testing.
6 包裝
6 packaging
包裝用清潔、干燥、無銹的200升鍍鋅鐵桶或鐵桶包裝,桶口應密封,以免漏損,每桶凈重(200±0.5)kg。
Packing 200 liters galvanized steel drum or drum with a clean, dry and free of rust, the barrel should be sealed in order to avoid leakage, barrel net weight (200 + 0.5) kg.
7 標志
7 mark
包裝外應印有:產品名稱、批號、生產日期、凈重、生產廠名。
Packaging should be printed with: product name, batch number, production date, net weight, the name of the factory.
8 附件
8 attachment
產品進廠時,隨貨應有材料生產廠家質量保證書或質量檢驗單,*供貨時,必須附有法定部門的型式試驗報告。正常供貨時,每年應提供一次法定部門的型式試驗報告。
When the product enters the factory, along with the goods should have the material manufacturer quality assurance book or the quality inspection sheet, the first time, must have the legal department the type test report. When the normal supply, the annual report of the type test of the legal department should be provided.
9 運輸
9 transportation
運輸時輕裝輕卸,避免碰撞,防止日曬雨淋。
The transportation light light unloading, avoid collision, prevent the sun and rain.
10 貯存
10 storage
應該存于通風良好,陰涼干燥的庫房內,防止日曬雨淋。
Should be stored in a well ventilated, cool and dry place, prevent the sun and rain.